Honda Power Equipment Honda Power Equipment Honda Marine Honda Engines
  • WSP50

WSP50

WSP50AA

1/2 hp 115V submersible trash pump

  • Side discharge
  • 110 gal./min capacity
  • Solids handling capability up to 2"
  • Automatic non-mercury float switch
  • Rated for continuous use

MSRP

$899*

Features

1/2hp, 115V submersible trash pump

115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).

Solids handling up to 2.0"

Move slurry and dirty liquids without the worry of damaging the pump.

Ideal for draining basements, window wells, garden irrigation, decorative fountains and more

110 gal./min capacity

Rated for continuous use

Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.

Solids handling up to 2.0"

Move slurry and dirty liquids without the worry of damaging the pump.

Lightweight, durable stainless steel casing

The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.

Automatic non-mercury float switch

Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.

Built in thermal reset switch

If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.

25 foot heavy duty cord

Side discharge

Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.

Operates fully or partially submerged

No need to worry about the water level for the pump!

Shielded ball bearings for added durability

Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.

Efficient air-insulated motor

Oil lubricated double mechanical seals

Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.

Specifications

Pump Type Submersible Trash pump
Starting Type Automatic
Casing Stainless Steel
Motor (HP) 1/2
Voltage 115
Starting amps 34
Running amps 8.3
Duty Continuous
Motor insulation Class F
Overhead protection Built-In Thermal Automatic Reset
Discharge Type Side
Discharge capacity 110 gpm
Max. head (feet) 32
Port diameter ( inches) 2.0 FNPT
Maximum pressure 14 psi
Solids handling 2.0"
Impeller Single Channel Stainless Steel
Seals Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower
Cord length (feet) 25
Cord type Heavy-Duty 115V
Dimensions (WxH) 9.0" x 21.5"
Pump diameter 9.0"
Dry weight 36 lbs.
Residential Warranty 1 year
Commercial Warranty 1 year

Pump Performance

WSP50 Pump Performance
Back to Top